Published November 30, 2022
| Version v1
Journal article
Open
DESIGN OF A MODERN FASTENING AND LOOSENING DEVICE FOR MACHINING OF PLATE-TYPE PARTS ON A MILLING MACHINE
Description
In the course of the study, an analysis of the manufacturability of the part was carried out. The type of production was determined in accordance with the annual production program and the design of the part. In accordance with the type of production, as well as the material of the part, a blank was selected. Calculations of allowances, tolerances, technological dimensions, cutting modes, main and auxiliary times, work piece clamping force for milling have been carried out.
As a result of the study, a technological process for manufacturing a part was designed and a special device for milling was designed.
Files
505-513.pdf
Files
(775.7 kB)
| Name | Size | Download all |
|---|---|---|
|
md5:8e5f7fc3bd87d98338c3887013f6677a
|
775.7 kB | Preview Download |
Additional details
Related works
- Is cited by
- Journal article: 10.5281/zenodo.7493126 (DOI)
References
- 1. Axunbabaev, O. A., & Karimov, R. J. (2022). Improving the process of back compaction in the formation of natural silk fabric on the loom. Science and Education, 3(2), 236-240. 2. Усманов, Д. А., Умарова, М. О., Абдуллаева, Д. Т., & Рустамова, М. М. (2022). УПАКОВКА КИП ХЛОПКА: ТЕХНИЧЕСКИЕ НОРМЫ ЗАГРУЗКИ ИХ В ВАГОНЫ. Universum: технические науки, (3-2 (96)), 38-42. 3. Onorboyev, O. A. O., & Karimov, R. J. O. (2022). Determining the optimal variant of mechanical processing of polymer composite materials. Science and Education, 3(3), 180-185. 4. Toshmatova, A. D. (2021). FARG'ONA VILOYATI PAXTA TERISH MASHINALARINING ZAMONAVIY TEXNOLOGIYALARGA INTEGRATSIYASINI TADQIQ QILISH. Oriental renaissance: Innovative, educational, natural and social sciences, 1(11), 457-464. 5. Robiljonov, I. I. O., & Karimov, R. J. O. G. L. (2021). IMPROVING THE EFFICIENCY OF MACHINING OF PARTS MADE OF STAINLESS MATERIALS. Scientific progress, 2(8), 581-587. 6. Jaxongir o'g'li, R. K., Toshmatovna, A. D., Muxtoraliyevna, R. M., & Xakimjon o'g'li, T. I. (2021). PROGRESSIVE CONSTRUCTIONS OF ADJUSTABLE SHEET PUNCHING STAMPS. EURASIAN JOURNAL OF SOCIAL SCIENCES, PHILOSOPHY AND CULTURE, 46. 7. Ergashev, I. O., Karimov, R. J. O. G. L., Karimov, R. X., & Nurmatova, S. S. (2021). KOLOSNIK ALMASHINUVCHI MASHINASI ELEMENTI EGILISHINING NAZARIY TADQIQOTLARI. Scientific progress, 2(7), 83-87. 8. Mirzaxojaev, S. D. O., & Karimov, R. J. O. G. L. (2021). RESEARCH OF MECHANICAL PROCESSING PROCESS ON THE BASIS OF MODERN METHODS OF MEASUREMENT AND CONTROL. Scientific progress, 2(8), 575-580. 9. Abdullayeva, D. T., & Turg'unbekov, A. M. O. G. L. (2021). ПРОДЛЕНИЕ СРОКА ХРАНЕНИЯ ЛИСТОВЫХ ДЕТАЛЕЙ ПРОКАТНОГО ОБОРУДОВАНИЯ. Oriental renaissance: Innovative, educational, natural and social sciences, 1(11), 1035-1045. 10. Tojiboyev R.K., Ulmasov A.A., Muxtorov Sh. 3M strukturaviy bog'lovchi lenta 9270 // Fan va ta'lim. 2021. №4. URL: https://cyberleninka.ru/article/n/3m-structural-bonding-tape-9270 11. Axunbabaev, O. A., & Karimov, R. J. (2022). Improving the process of back compaction in the formation of natural silk fabric on the loom. Science and Education, 3(2), 236-240. 12. Усманов, Д. А., Умарова, М. О., Абдуллаева, Д. Т., & Рустамова, М. М. (2022). УПАКОВКА КИП ХЛОПКА: ТЕХНИЧЕСКИЕ НОРМЫ ЗАГРУЗКИ ИХ В ВАГОНЫ. Universum: технические науки, (3-2 (96)), 38-42. 13. Onorboyev, O. A. O., & Karimov, R. J. O. (2022). Determining the optimal variant of mechanical processing of polymer composite materials. Science and Education, 3(3), 180-185. 14. Toshmatova, A. D. (2021). FARG'ONA VILOYATI PAXTA TERISH MASHINALARINING ZAMONAVIY TEXNOLOGIYALARGA INTEGRATSIYASINI TADQIQ QILISH. Oriental renaissance: Innovative, educational, natural and social sciences, 1(11), 457-464. 15. Robiljonov, I. I. O., & Karimov, R. J. O. G. L. (2021). IMPROVING THE EFFICIENCY OF MACHINING OF PARTS MADE OF STAINLESS MATERIALS. Scientific progress, 2(8), 581-587. 16. Jaxongir o'g'li, R. K., Toshmatovna, A. D., Muxtoraliyevna, R. M., & Xakimjon o'g'li, T. I. (2021). PROGRESSIVE CONSTRUCTIONS OF ADJUSTABLE SHEET PUNCHING STAMPS. EURASIAN JOURNAL OF SOCIAL SCIENCES, PHILOSOPHY AND CULTURE, 46. 17. Ergashev, I. O., Karimov, R. J. O. G. L., Karimov, R. X., & Nurmatova, S. S. (2021). KOLOSNIK ALMASHINUVCHI MASHINASI ELEMENTI EGILISHINING NAZARIY TADQIQOTLARI. Scientific progress, 2(7), 83-87. 18. Mirzaxojaev, S. D. O., & Karimov, R. J. O. G. L. (2021). RESEARCH OF MECHANICAL PROCESSING PROCESS ON THE BASIS OF MODERN METHODS OF MEASUREMENT AND CONTROL. Scientific progress, 2(8), 575-580. 19. Abdullayeva, D. T., & Turg'unbekov, A. M. O. G. L. (2021). ПРОДЛЕНИЕ СРОКА ХРАНЕНИЯ ЛИСТОВЫХ ДЕТАЛЕЙ ПРОКАТНОГО ОБОРУДОВАНИЯ. Oriental renaissance: Innovative, educational, natural and social sciences, 1(11), 1035-1045. 20. Tojiboyev R.K., Ulmasov A.A., Muxtorov Sh. 3M strukturaviy bog'lovchi lenta 9270 // Fan va ta'lim. 2021. №4. URL: https://cyberleninka.ru/article/n/3m-structural-bonding-tape-9270 21. Toshkoziyeva, Z., & Muxtorov, S. (2022). DESIGN ANALYSIS FOR THE PRODUCTION OF PLATE HANDLES FOR CAR WINDSHIELDS. Journal of Integrated Education and Research, 1(1), 164–172. Retrieved from https://ojs.rmasav.com/index.php/ojs/article/view/34. 22. Toshkoziyeva, Z., & Muxtorov, S. (2022). ANALYSIS OF THE REQUIREMENTS FOR MODERN HEAT EXCHANGERS AND METHODS OF PROCESS INTENSIFICATION. Journal of Integrated Education and Research, 1(1), 140–149. Retrieved from https://ojs.rmasav.com/index.php/ojs/article/view/30. 23. Toshqo'ziyeva, Z., & Muxtorov, S. (2022). AVTOMABILLARNI 3M STRUKTURALI ULASH LENTASI BILAN MAXKAMLANUVCHI PLASTINA TUTQICHI KONSTRUKSIYALARINI TAXLILI. Journal of Integrated Education and Research, 1(1), 114–125. Retrieved from https://ojs.rmasav.com/index.php/ojs/article/view/27. 24. Sherzod Sobirjon O'G'Li Muxtorov, & Islombek Ikromjon O'G'Li Qoxxorov (2022). Issiqlik almashuvchi qurulmalar va ularda jarayonni intensivlash usullari tahlili. Science and Education, 3 (5), 370-378. 25. https://www.grnjournals.us/index.php/ajshr/article/view/728. 26. Махмудов, А., & Мухторов , Ш. (2022). ВЛИЯНИЕ ИНДИВИДУАЛЬНОГО УВЛАЖНИТЕЛЯ НА ОБРЫВНОСТЬ НИТЕЙ ОСНОВЫ В ПРОЦЕССЕ ТКАЧЕСТВА. Eurasian Journal of Academic Research, 2(13), 884–890. извлечено от https://www.in-academy.uz/index.php/ejar/article/view/7639. 27. Махмудов, А., & Мухторов , Ш. (2022). ИССЛЕДОВАНИЕ ОСНОВНОГО ПЛАНЕТАРНОГО РЕГУЛЯТОРА. Eurasian Journal of Academic Research, 2(13), 879–883. извлечено от https://in-academy.uz/index.php/ejar/article/view/7638. 28. Valikhonov Dostonbek Azim ogli, & Nurmatova Salimakhon Sobirovna. (2022). A METHOD OF CALCULATING THE DEPTH OF CUT IN A LATHE AFTER ROLLING ON A ROUGH PART. Galaxy International Interdisciplinary Research Journal, 10(2), 77–83. Retrieved from https://www.giirj.com/index.php/giirj/article/view/1201. 29. Salima Sobirovna Nurmatova (2022). Yoqilg'ining ekspluatatsion samaradorligini oshirish. Science and Education, 3 (5), 622-626. 30. Nurmatova, S. S. (2022). Universal xarakteristikalardan foydalanib dvigatelning ish hajmini o'zgartirish orqali uni boshqarishda samaradorlik ko'rsatkichlarini tadqiq etishning hisob-eksperimental usuli. Science and Education, 3(5), 627-632. 31. Ergashev, I. O. Rustam Jaxongir o'g'li Karimov, Ravshan Xikmatullayevich Karimov, & Salimaxon Sobirovna Nurmatova (2021). Kolosnik. 32. Турғунбеков Аҳмадбек Махмудбек Ўғли, & Маматқулова Дилдора Нуритдиновна (2022). КОНСТРУКЦИЯ И РАБОЧИЙ ПРОЦЕСС ФРЕЗЫ ДЛЯ ХОЛОДНОЙ РЕКУЛЬТИВАЦИИ ДОРОГ. Universum: технические науки, (5-3 (98)), 8-11. 33. Турғунбеков Ахмадбек Махмудбек Ўғли (2022). МЕТОДИКА ВЫБОРА БИОМЕХАНИЧЕСКОГО МОДЕЛИРОВАНИЯ. Universum: технические науки, (5-3 (98)), 5-7. 34. Yusufjonov Otabek, Ro'Zaliyev Xojiakbar, & Turgunbeqov Axmadbek (2022). EXPERIMENTAL STUDIES OF THE TECHNOLOGICAL PROCESS OF PROCESSING CONCAVE SURFACES OF COMPLEX SHAPES. Universum: технические науки, (5-10 (98)), 48-50. 35. Бахадиров, Гайрат Атаханович , Эргашев, Илхомжон Олимжонович, Цой, Герасим Николаевич, & Набиев, Айдер Мустафаевич (2022). УСТРОЙСТВО ДЛЯ ОПРЕДЕЛЕНИЯ СИЛЫ ВТЯГИВАНИЯ ПЛОСКОГО МАТЕРИАЛА МЕЖДУ РАБОЧИМИ ВАЛКОВЫМИ ПАРАМИ. Nazariy va amaliy tadqiqotlar xalqaro jurnali, 2 (3), 66-73. doi: 10.5281/zen 36. Эргашев, Илхомжон Олимжонович (2022). АРРАЛИ ДЖИН КОЛОСНИКЛАРИ АЛМАШУВЧИ ЭЛЕМЕНТЛАРИНИ КОНСТРУКТИВ ЎЛЧАМЛАРИНИ АСОСЛАШ. Nazariy va amaliy tadqiqotlar xalqaro jurnali, 2 3, 88-97. doi: 10.5281/zenodo.6503659odo.6503605 37. Бахадиров, Г. А., Цой, Г. Н., Набиев, А. М., & Эргашев, И. О. (2022). Экспериментальный Отжим Капиллярно-Пористого Материала На Металлокерамической Опорной Плите. Central Asian Journal of Theoretical and Applied Science, 3(5), 100-109. Retrieved from https://cajotas.centralasianstudies.org/index.php/CAJOTAS/article/view/499 38. Fayzimatov Shukhrat Nomonovich, Ergashev Ilhomjon Olimjonovich, & Valikhonov Dostonbek Azim o'g'li. (2022). Effects Of Crushing on Cutting and Cleaning of Surface Facilities in Cutting and Processing of Polymer Materials. Eurasian Research Bulletin, 4, 17–21. Retrieved from https://www.geniusjournals.org/index.php/erb/article/view/353 39. Ilhom Olimjonovich Ergashev, Rustam Jaxongir O'G'Li Karimov, Ravshan Xikmatullayevich Karimov, & Salimaxon Sobirovna Nurmatova (2021). KOLOSNIK ALMASHINUVCHI MASHINASI ELEMENTI EGILISHINING NAZARIY TADQIQOTLARI. Scientific progress, 2 (7), 83-87. 40. Ergashev Ilhomjon Olimjonoviсh, & Mahmudov Nasimbek Odilbekoviсh. (2022). Сalсulation of Сarrier and Interсhangeable Element Сombination. Eurasian Journal of Engineering and Technology, 5, 68–73. Retrieved from https://www.geniusjournals.org/index.php/ejet/article/view/1162 41. Мухаммадиев, Д. М., Ахмедов, Х. А., & Эргашев, И. О. (2020). Расчет перемещений вставки относительно колосник. In Инновационные исследования: теоретические основы и практическое применение (pp. 103-105). 42. Мухаммадиев, Д. М., Ахмедов, Х. А., Эргашев, И. О., Жамолова, Л. Ю., & Мухаммадиев, Т. Д. (2020). Силовой расчет соединений колосника пильного джина со вставкой. Известия высших учебных заведений. Технология текстильной промышленности, (1), 137-143. 43. МамажоновичX. А. (2021). Влияние Натяжения Нитей Основы На Обрывность Ее При Ткачестве. Central Asian Journal of Theoretical and Applied Science, 2(12), 178-183. Retrieved from https://cajotas.centralasianstudies.org/index.php/CAJOTAS/article/view/328 44. Sherzod Sobirjon O'G'Li Muxtorov, & Islombek Ikromjon O'G'Li Qoxxorov (2022). Issiqlik almashuvchi qurulmalar va ularda jarayonni intensivlash usullari tahlili. Science and Education, 3 (5), 370-378.