ENGINEERING FORMULATION AND MATHEMATICAL FORMULATION OF THE PROBLEM OF ENERGY EQUIVALENCE OF WATER SUPPLY SYSTEMS
Keywords:
Annular, knots, ring.Abstract
One of the main circulations of today’s water supply system is the emergence of various circulations in the long-term maintenance of the network, the system allows for shortcomings in the calculation of the volume and the rapid growth of the population, and as a result of this, the pipes lead to rapid failure.
Given the fact that the master’s thesis comes from these circulations and the rapid wear of the pipes, it is aimed at calculating the system and solving the problems in the design of this system with the most optimal one.
Due to these circulations in the water supply, the ways of solving the problems in the system using different methods, the distribution of the flow in the water supply system with the help of modern programs were clearly summarized.
References
Todjiboyev R.K., Ulmasov A.A., & Muxtorov Sh. (2021). 3M structural bonding tape 9270. Science and Education, 2 (4), 146-149.
Toshkoziyeva, Z., & Muxtorov, S. (2022). DESIGN ANALYSIS FOR THE PRODUCTION OF PLATE HANDLES FOR CAR WINDSHIELDS. Journal of Integrated Education and Research, 1(1), 164–172. Retrieved from https://ojs.rmasav.com/index.php/ojs/article/view/34
Toshkoziyeva, Z., & Muxtorov, S. (2022). ANALYSIS OF THE REQUIREMENTS FOR MODERN HEAT EXCHANGERS AND METHODS OF PROCESS INTENSIFICATION. Journal of Integrated Education and Research, 1(1), 140–149. Retrieved from https://ojs.rmasav.com/index.php/ojs/article/view/30
Sherzod Sobirjon, O. G. ‘Li Muxtorov, & Islombek Ikromjon O’G’Li Qoxxorov (2022). Issiqlik almashuvchi qurulmalar va ularda jarayonni intensivlash usullari tahlili. Science and Education, 3(5), 370-378.
Toshqo’ziyeva, Z., & Muxtorov, S. (2022). AVTOMABILLARNI 3M STRUKTURALI ULASH LENTASI BILAN MAXKAMLANUVCHI PLASTINA TUTQICHI KONSTRUKSIYALARINI TAXLILI. Journal of Integrated Education and Research, 1(1), 114–125. Retrieved from https://ojs.rmasav.com/index.php/ojs/article/view/27
Махмудов, А., & Мухторов , Ш. (2022). ВЛИЯНИЕ ИНДИВИДУАЛЬНОГО УВЛАЖНИТЕЛЯ НА ОБРЫВНОСТЬ НИТЕЙ ОСНОВЫ В ПРОЦЕССЕ ТКАЧЕСТВА. Eurasian Journal of Academic Research, 2(13), 884–890. извлечено от https://www.in-academy.uz/index.php/ejar/article/view/7639
Махмудов, А., & Мухторов , Ш. (2022). ИССЛЕДОВАНИЕ ОСНОВНОГО ПЛАНЕТАРНОГО РЕГУЛЯТОРА. Eurasian Journal of Academic Research, 2(13), 879–883. извлечено от https://in-academy.uz/index.php/ejar/article/view/7638
Mukhtorov, S. S. ugli, & Rustamova, M. M. (2022). AN ANALYSIS OF THE IMPACT OF CONFIDENCE ON THE RELIABILITY OF EARTHQUAKE DETECTION UNDERGROUND. Educational Research in Universal Sciences, 1(6), 480–487. Retrieved from http://erus.uz/index.php/er/article/view/813
Mukhtorov, S. S. ugli, & Rustamova, M. M. (2022). IMPROVING THE STRENGTH OF DETAILS BY CHROMING THE SURFACES. Educational Research in Universal Sciences, 1(6), 488–496. Retrieved from http://erus.uz/index.php/er/article/view/814
Нурматова C. С., & Myхторов Ш. С. (2022). В ПРОЦЕССЕ ПЛЕТЕНИЯ ВЛИЯНИЕ ТОЧНОГО СМАЧИВАНИЯ НА ОБРЫВ СОЕДИНИТЕЛЬНЫХ НИТЕЙ. Educational Research in Universal Sciences, 1(6), 524–533. Retrieved from http://erus.uz/index.php/er/article/view/820
Xusanboyev, A., & Muxtorov, S. (2022). NOSOZLIKLAR SONINI TAQSIMLASH VA KANALIZATSIYA TARMOQLARI ELEMENTLARINI TIKLASH MUDDATI. Educational Research in Universal Sciences, 1(6), 617–625. Retrieved from http://erus.uz/index.php/er/article/view/831
Abdullayeva, D., & Muxtorov, S. (2022). SEYSMIK HUDUDLARDA KANALIZATSIYA TARMOQLARINI ISHONCHLILIGINI BAHOLASH. Educational Research in Universal Sciences, 1(6), 514–523. Retrieved from http://erus.uz/index.php/er/article/view/818
Toshqo’ziyeva, Z., & Muxtorov, S. (2022). KANALIZATSIYA TARMOQLARI ELEMENTLARINING ISHONCHLILIGI KO’RSATKICHLARINING SON QIYMATLARINI ANIQLASH. Educational Research in Universal Sciences, 1(6), 609–616. Retrieved from http://erus.uz/index.php/er/article/view/830
Khusanboyev, A., & Mukhtorov, S. (2022). IMPROVING THE STRENGTH OF DETAILS BY CHROMING THE SURFACES. Educational Research in Universal Sciences, 1(6), 626–634. Retrieved from http://erus.uz/index.php/er/article/view/832
Sherzod Sobirjon O’G’Li Muxtorov, & Islombek Ikromjon O’G’Li Qoxxorov (2022). Issiqlik almashuvchi qurulmalar va ularda jarayonni intensivlash usullari tahlili. Science and Education, 3 (5), 370-378
Zulfiya, B., Rakhmonali, S., & Murodjon, K. (2021). A BRIEF HISTORY OF THE DEVELOPMENT AND TEACHING OF DRAWING SCIENCE IN UZBEKISTAN.
Kodirov, Murodjon Yusupovich (2021). WAYS OF IMPROVING THE TECHNOLOGICAL PROCESSES OF SHEET STAMPING. Oriental renaissance: Innovative, educational, natural and social sciences, 1 (11), 151-159.
Кадиров, М. Ю. (2021). ТAЛAБАЛAРНИНГ ОЛИМПИAДA ВA ТAНЛОВЛAРДA ИШТИРОКИ ОРҚAЛИ ГРAФИКA ФAНЛAРИДAН МУСТAҚИЛ ИШЛAРНИ ФAОЛЛAШТИРИШ. Oriental renaissance: Innovative, educational, natural and social sciences, 1(11), 289-295.
Yusupovich, K. M. (2021). CONJUGATED METHOD FOR STUDYING THE BASICS OF THE THEORY OF THE COURSE" DRAFT GEOMETRY". Oriental renaissance: Innovative, educational, natural and social sciences, 1(11), 386-394.
Kodirov, M. Y. (2021). PERSPECTIVE DETERMINATOR METHOD. Oriental renaissance: Innovative, educational, natural and social sciences, 1(11), 395-402.
Kadirov, Murod Yusurovich (2022). “CHIZMACHILIK” VA “CHIZMA GEOMETRIYA” FANLARIDAN MUSOBAQALARDA QATNASHISHI ORQALI TEXNIKA OLIY YURTLARI TALABLARINING MUSTAQIL ISHLARINI FAOLLASHTIRISH. Oriental renaissance: Innovative, educational, natural and social sciences, 2 (10-2), 120-124.
Кадиров, М.Ю. (2022). КОМПЮТЕРНАЯ ГРАФИКА, ЧЕРЧЕНИЕ, ИНЖЕНЕРНАЯ ГРАФИКА И НАЧЕРТАТЕЛЬНАЯ ГЕОМЕТРИЯ ОСНОВА КОМПЕТЕНТНОСТИ КОНСТРУКТОРА ПРОЕКТИРОВШИКА. Oriental renaissance: Innovative, educational, natural and social sciences, 2 (10-2), 157-166.
Кадиров, М.Ю. (2022). УЧЕБНЫЙ СПОМОГАТЕЛЬНЫЙ МАТЕРИАЛ КАК СРЕДСТВО УГЛУБЛЕНИЕ УЧЕБНОГО ПРОЦЕССА ПРИ ИЗУЧЕНИИ ГРАФИЧЕСКИХ ДИСЦИПЛИН. Oriental renaissance: Innovative, educational, natural and social sciences, 2 (10-2), 24-30.
Ilhom Olimjonovich Ergashev, Rustam Jaxongir O’G’Li Karimov, Ravshan Xikmatullayevich Karimov, & Salimaxon Sobirovna Nurmatova (2021). KOLOSNIK ALMASHINUVCHI MASHINASI ELEMENTI EGILISHINING NAZARIY TADQIQOTLARI. Scientific progress, 2 (7), 83-87.
Холмурзаев Абдирасул Абдуахадович, Алижонов Одилжон Исакович, Мадаминов Жавлонбек Зафаржонович, & Каримов Равшанбек Хикматуллаевич (2019). Эффективные средства создания обучающих программ по предмету «Начертательная геометрия». Проблемы современной науки и образования, (12-1 (145)), 79-80.
Усманов Джасур Аминович, Умарова Мунаввар Омонбековна, Абдуллаева Доно Тошматовна, & Ботиров Алишер Ахмаджон Угли (2019). Исследование эффективности очистки хлопка-сырца от мелких сорных примесей. Проблемы современной науки и образования, (11-1 (144)), 48-51.
Достонбек Азим Ўғли Валихонов, Алишер Ахмаджон Ўғли Ботиров, Зухриддин Носиржонович Охунжонов, & Равшан Хикматуллаевич Каримов (2021). ЭСКИ АСФАЛЬТО БЕТОННИ КАЙТА ИШЛАШ. Scientific progress, 2 (1), 367-373.
Достонбек Азим Ўғли Валихонов, Алишер Ахмаджон Ўғли Ботиров, Зухриддин Носиржонович Охунжонов, & Равшан Хикматуллаевич Каримов (2021). ЭСКИ АСФАЛЬТО БЕТОННИ КАЙТА ИШЛАШ. Scientific progress, 2 (1), 367-373.
Ботиров, А. (2022). АНАЛИЗ РАЗЛИЧНЫХ МЕТОДОВ ПОВЫШЕНИЯ КАЧЕСТВА ОБРАБОТКИ ДЕТАЛЕЙ ТИПА «ТЕЛ ВРАЩЕНИЯ» ИЗ ТИТАНОВЫХ СПЛАВОВ. Educational Research in Universal Sciences, 1(7), 484–489. Retrieved from http://erus.uz/index.php/er/article/view/922
Ботиров, А. А. (2022). “ЦИЛИНДРИК ЖИСМЛАРГА” МЕХАНИК ИШЛОВ БЕРИШ. Educational Research in Universal Sciences, 1(6), 443–449. Retrieved from http://erus.uz/index.php/er/article/view/803.
Oxunjonov, Z. N. (2022). AVTOMOBIL OYNALARINI VAKUUMLASHDA VAKUUM XALQALARINI KONSTRUKSIYALARI TAXLILI. Zamonaviy dunyoda innovatsion tadqiqotlar: Nazariya va amaliyot, 1(11), 11-14.
Valixonov Dostonbek Azim o’g’li, & Ohunjonov Zuxriddin Nosirjonovich. (2022). A Method of Calculating the Depth of Cut in A Lathe After Rolling on A Rough Part. Eurasian Journal of Engineering and Technology, 3, 6–11. Retrieved from https://geniusjournals.org/index.php/ejet/article/view/555
Kholmurzaev, A. A., & Tokhirov, I. K. (2022). Involvement of Students in the Performance of Test Tasks and Conducting Control Work in the Lessons of Descriptive Geometry and Engineering Graphics. Journal of Architectural Design, 6, 5-8.
Xolmurzayev, A.A., & Toxirov, I.X. (2021). TALABALARNING O’QUV JARAYONINI SHAKILLANTIRISHDA KOMPYUTERLI O’QITISH TEXNOLOGIALARINI O’RNI. Oriental renaissance: Innovative, educational, natural and social sciences, 1 (11), 283-288.
Абдукаримов, Б. А., & Тохиров, И. Х. (2019). Research of convective heat transfer in solar air heaters. Наука, техника и образование, (9 (62)).
Tokhirov, Islombek Khakimjon Ugli (2021). SELECTION OF THE MANUFACTURING PROCESS OF THE PART. Oriental renaissance: Innovative, educational, natural and social sciences, 1 (10), 698-704.
Сайдулло Собирович Арзиев, & Исломжон Хакимжон Ўғли Тохиров (2021). ФАЗОВИЙ ФИКРЛАШНИНГ БЎЛАЖАК МУҲАНДИС ВА АРХИТЕКТОРЛАР ИЖОДИЙ ФАОЛИЯТИДА ТУТГАН ЎРНИ. Scientific progress, 2 (2), 438-442.
Abdullayev, B. X., Rahmankulov, S. A., & Toxirov, I. H. o’g’li. (2021). Movement of Variable Flow Flux Along the Path in a Closed Inclined Pipeline. Central Asian Journal of Theoretical and Applied Science, 2(12), 120-126. Retrieved from https://cajotas.centralasianstudies.org/index.php/CAJOTAS/article/view/320.
Холмурзаев Абдирасул Абдуахадович, Тохиров Исломжон Хакимжон Угли, & Охунжонов Зухриддин Носиржонович (2019). Движение летучки хлопка-сырца в зоне от вершины колка до отражающего козырька. Проблемы современной науки и образования, (11-2 (144)), 19-21.
